Botou Hengrui Environmental Protection Equipment Co. Ltd.
DMF-Y-62S Electromagnetic Pulse Valve,Electromagnetic Pulse Valve for Dust Remover,DMF-Y-62S Pulse Valve
Payment Type: | L/C |
---|---|
Incoterm: | FOB,CIF |
Model No.: Customized
Packaging: carton
Transportation: Ocean,Land
Port: Xingang China
Payment Type: L/C
Incoterm: FOB,CIF
The general technical parameters of the Electromagnetic Pulse Valve are as follows.
A, adapt to the environment: temperature -10 ~ +55 C; relative humidity is not greater than 85%.E, electromagnetic pilot valve working voltage and current: DC24V, 0.8A; AC220V, 0.14A; AC110V, 0.3A.
F, electromagnetic pulse valve intake port air bag, outlet nozzle spray pipe. During the connection, the Teflon tape should be filled between the threads to ensure sealing. When connecting, it is also necessary to note that the length of the screw thread in the intake terminal can not be too large, so as not to affect the injection volume.
The right angle electromagnetic pulse valve is characterized by a 90 degree right angle of the air inlet and outlet pipe of the valve. The diaphragm in the valve divides the electromagnetic pulse valve into two air chambers in the front and back. When the compressed air is connected, the compressed air enters the rear air chamber through the throttle hole, and the pressure of the air chamber will close the diaphragm to the outlet of the valve, and the pulse valve is in the "closed" state.
Product Categories : Dust Collector Fittings > Electromagnetic Pulse Valve