The pulse solenoid valve is a dust cleaning product on the pulse Bag Type Dust Collector, which is installed at the interface of the duster blowout tube, as the injection switch of the compressed air, controlled by the electrical signal of the pulse injection control instrument, blowing the dust filter bag in row by a row, and changing the compressed air into the original air for a few times after the instantaneous release, and can be blown off in a very short time. Dust on the surface of a filter bag.
The pulse solenoid valve is a diaphragm valve with long service life and high efficiency in cleaning ash. The cleaning principle of the pulse solenoid valve is summarized. The diaphragm is divided into two air chambers before and after the pulse valve. When the compressed air is connected to the compressed air, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the air chamber presses the diaphragm to the outlet of the valve and the pulse valve. In the "closed" state. The electric signal of the pulse controller makes the armature of the Electromagnetic Pulse Valve move, the gas chamber opening after the valve, the pressure of the rear air chamber, the diaphragm, the compressed air passing through the outlet of the valve, and the "opening" state of the pulse valve. Compressed air is ejected instantly from the valve to form a jet flow.
Looking for ideal 1 Inch Pulse Solenoid Valve Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Rectangular Diaphragm Type Gas Solenoid Valve are quality guaranteed. We are China Origin Factory of High Quality Gas Solenoid Valve. If you have any question, please feel free to contact us.
Product Categories : Dust Collector Fittings > Electromagnetic Pulse Valve