http://www.hrdustcollector.com
Home > Products > Dust Collector Fittings > Electromagnetic Pulse Valve > DMC-Z-40S pulse electromagnetic valve

DMC-Z-40S pulse electromagnetic valve

    Payment Type: L/C
    Incoterm: FOB,CIF
Basic Info

Model No.Customized

Additional Info

Packagingcarton

TransportationOcean,Land

PortXingang China

Payment TypeL/C

IncotermFOB,CIF

Product Description

Test classification:

1, the products must be inspected by the provisions of the 2, 3, 4 and 9 requirements of the valves one by one before they leave the factory.
2, quarterly sampling of the factory products 15% (not less than 10), according to the technical requirements of the 5 and 8 provisions of the inspection.
type inspection
In case of any of the following circumstances, type inspection shall be carried out:
A  the first batch of products produced;
B changes in the production process and the use of materials;
C  the valves produced in batch should be carried out once every three years.

D  the national quality supervision structure puts forward the requirement of type inspection.

structure

Electromagnetic Pulse Valve

The pulse valve consists of solenoid valve, small valve body, large valve body, small diaphragm, spring and large diaphragm, and the valve body is made of alloy aluminum.

Working conditions:
When the Electromagnetic Pulse Valve is used, the environmental conditions are very important, which is related to the normal and smooth operation of the electromagnetic pulse valve. The environment conditions of the electromagnetic pulse valve:
1, according to the type of power supply, AC and DC solenoid valves are selected respectively. Generally speaking, AC power supply is convenient to use.
2, in corrosive or explosive environments, corrosion resistance should be preferred according to safety requirements.
3, if the environment space is restricted, please use the multi-function solenoid valve, because it eliminates bypass and three manual valves and is convenient for online maintenance.

Small low pressure solenoid valve
4, the power supply voltage fluctuations usually AC +%10%.-15%, DC tolerance of about%10, if ultra poor, must take measures to stabilize or put special order requirements.
5, the highest and minimum temperature of the environment should be selected within the allowable range. If there is excess deviation, special orders should be put forward.
6, the power condition of the electromagnetic pulse valve
7, special occasions such as vibration, bump and impact should be selected in the environment, such as marine solenoid valves.
8, voltage specifications are preferred to AC220V.DC24V.
9, in the environment where relative humidity is high and water droplets are dripping, we should choose waterproof solenoid valves.
10, the rated current and power consumption should be selected according to the power supply capacity. Attention should be paid to the higher VA value when AC starting, and the indirect guided solenoid valve should be preferred when the capacity is insufficient.

Submerged electromagnetic pulse valve


Product Categories : Dust Collector Fittings > Electromagnetic Pulse Valve

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Liuhuabing Mr. Liuhuabing
What can I do for you?
Contact Supplier