Right angle solenoid valve

Definition:

The pulse solenoid valve is also called the diaphragm valve. It is the "switch" of the compressed air in the dust cleaning and blowing system of the pulse Bag Type Dust Collector. It is controlled by the output signal of the pulse injection control instrument, and blows the dust in the filter bag (room), so that the resistance of the dust collector is kept within the set range, so as to ensure the handling capacity and the dust collecting efficiency of the dust collector.

The coil of the solenoid valve is input into the forward pulse signal through the wire, and the working flux generated by the coil causes the moving core to pull in and open the valve. When the forward pulse signal is stopped, the moving core is released, the moving core is returned to the initial state under the effect of spring force, and the valve is also kept in the form of self holding, and it can be kept after the forward pulse or power break, and the negative pulse signal is needed to reset. The principle of the pulse solenoid valve is to use the pulse of the electrical apparatus. The impulse is transformed into a mechanical pulsation, which makes the strong energy of the pulsating gas become momentum, and produces a huge force in a short time. The interval of the pulse is controlled by PLC to be determined according to the recovery time of the rated gas pressure, L.

Product Categories : Dust Collector Fittings > Electromagnetic Pulse Valve