http://www.hrdustcollector.com
Home > Products > Bag Type Dust Collector Series > Filter Cartridge Dust Collector > Industrial Filter Bag Deduster

Industrial Filter Bag Deduster

    Payment Type: L/C,T/T
    Incoterm: FOB,CIF
    Min. Order: 1 Bag/Bags
Basic Info

Model No.Filter cartridge dust collector

Additional Info

Packagingwooden crate

TransportationOcean,Land

PortXingang China

Payment TypeL/C,T/T

IncotermFOB,CIF

Product Description
Characteristic
The characteristics of the filter dust collector are as follows:
(1) because the filter material is folded into a cylinder, the density of the filter material is large, so the dust collector has compact structure and small volume.
Filter cartridge type dust collector
Filter cartridge type dust collector
2. The height of filter cartridge is small, the installation is convenient, and the workload of using and repairing is small.
3. The filter area of the same volume dust collector is relatively large, and the filtration speed is small and the resistance is not large.
4. Filter materials fold and fold, require strict sealing at both ends, no leakage, otherwise it will reduce the effect.

Cylinder Dust Collecting Equipment

The characteristics of the pulse Filter Cartridge Dust Collector are as follows:
1, the filter cartridge uses imported polyester fiber as the filter material to attach a layer of submicron super thin fiber to the ordinary filter material, and the arrangement of the fiber is very close on the adhesive layer, and the tiny sieve holes can block most submicron dust particles on the filter material surface.
2, the use of filter folds can increase the filter area and make the dust collector structure more compact.
3. The height of the filter tube is small and the installation and maintenance work is small.
4, compared with the same volume dust collector, the filtration area is relatively large, the filtration speed is small, and the resistance is not large.
5. The ash cleaning method of single unit dust collector adopts pulse jet on-line cleaning method. The process of ash cleaning is automatically controlled by a pulse controller. A number of filters are set in the dust collector to increase the effective filtration area. When a (to) filter meets the requirements for setting ash setting, it starts with a spray blowing device to clean the ash, and the other filters work normally, so that the dust removal effect can be achieved without affecting the operation of the equipment, and the dust remover can be continued to run; the combined dust remover is used for cleaning ash. Off-line pulse automatic circulation cleaning. Every filter chamber is set up to increase its effective filter area. When a filter chamber of a dust collector meets the requirement of setting ash setting, it starts with the blowing device to clean ash, and the other duster rooms work normally, so that the dust cleaning effect can be ensured and the dust remover can run continuously.

6, high dust removal efficiency (usually up to 99.6%), easy to operate.

Industrial Air Filtration System


Product Categories : Bag Type Dust Collector Series > Filter Cartridge Dust Collector

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Liuhuabing Mr. Liuhuabing
What can I do for you?
Contact Supplier