Dust collector of mine thermo electric furnace

The dust collector of the mine thermo electric furnace can be made of half cover, full cover, full cover. Top West hood or rotating cover. The PL bag dust collector of electric furnace dust collector designed by our company is made of high temperature resistant material with high temperature to more than 260 degrees Celsius as a cloth bag and a spark complement in front of the dust collector to guarantee the safety of the equipment. Full operation.
The electric furnace bag filter system has reliable equipment, no image normal smelting operation, convenient maintenance.

2. The flue gas capture is the whole process of capture.
3. The flue gas capture rate is >98%, so that smoke and dust can not be found on the roof of the workshop.
4, the efficiency of dust removal >99%.
5. The dust concentration of the post in the workshop was <10mg/m3.
6. The long term operation cost is low and the efficiency is stable.
7. The noise of the wind machine room is <80dB.
8. There is no ash accumulation in the flue.

Bag filter
The working principle of the dust collector is as follows: the dust gas is entered into the filter chamber by the open flange of the lower part, the coarser particles fall directly into the ash bin, the dust gas is filtered through the filter bag, the dust is kept in the bag table, the net gas is passed through the bag to the air cleaning chamber, and the air is discharged into the air by the fan. When the dust on the surface of the filter bag is constantly increasing, the program control instrument begins to work, and the pulse valve is opened one by one to make the compressed air blowing and blowing the dust through the nozzle, so that the filter bag is suddenly expanded. Under the action of the reverse flow, the dust of the bag table is quickly separated from the filter bag and falls into the ash bin, and the dust is discharged by the dust relief valve.

Product Categories : Single Machine Dust Collector