Home > Products > Wet Dust Collector Series > Wet Electrostatic Precipitator > Industrial smoke control expert

Industrial smoke control expert

    Payment Type: L/C,T/T
    Incoterm: FOB,CIF
    Delivery Time: 15 Days
Basic Info

Model No.: Customized

Additional Info

Packaging: wooden crate

Transportation: Ocean,Land

Port: Xingang China

Product Description

Wet Electrostatic Precipitator

Wet electrostatic precipitator is a new dedusting equipment for treating micro dust and micro particles. It is used to remove dust, acid fog, water droplet, aerosol, odor, PM2.5 and other harmful substances in the wet gas. It is an ideal equipment to control the dust pollution in the atmosphere.
Wet electrostatic precipitator is usually referred to as WESP, which is the same as the basic principle of dry electrostatic precipitator. It has to go through three stages: charging, collecting and cleaning.
Structure and classification

There are two main types of wet electrostatic precipitators. One is to use corrosion resistant conductive materials (non metal materials with excellent conductive properties or metal materials with corrosion resistance), the other is to form conductive water film by water spray or overflow water, and to use non conductive non-metallic materials to collect dust.

High voltage electrostatic precipitator

The wet electrostatic precipitator can also be divided into transverse flow (horizontal) and vertical flow (vertical), the transverse flow is mostly plate type, the flow of gas flows in and out of the horizontal direction, the structure is similar to the dry electrostatic precipitator, and the vertical flow is mostly tube structure, and the flow of gas flows in vertical direction. Generally speaking, the efficiency of vertical flow wet electrostatic precipitator is 2 times that of cross flow under the same ventilation section area.

Dust collected on the plate can be washed down by water. Wet ash cleaning can prevent the dust from catching up again and achieve high dust removal efficiency. Because of no vibration device, the operation is also more reliable. The device that uses water spray or overflow water to make the conductive film formed on the surface of the dust collector has the problems of corrosion, sludge and sewage treatment, only when the gas concentration is low and the dust removal efficiency is high, and the wet electrostatic precipitator using corrosion resistant conductive material does not need long water spray or overflow water, only According to the regular running condition of the system, only a very small amount of water is consumed. The water can be recycled and the dust collecting system has no pollution for two times.

Wet Electrostatic Precipitator

Dust collecting principle
The dust collecting principle of the wet electrostatic precipitator and the dry electrostatic precipitator is the same. The dust is charged by the high pressure corona discharge. The dust after the charge arrives at the dust collecting plate / tube under the action of the electric field force. Dry electrostatic precipitators mainly deal with dry gas with very low moisture content. Wet electrostatic precipitator mainly deals with wet gas with high or even saturated moisture. There is a great difference between WESP and DESP in dust removal on the dust collection board / tube. The dry dust remover usually uses mechanical vibration or sonic dust cleaning to clear the ash on the electrode, while the wet electrostatic precipitator is used regularly to clean the dust with the flow of the scour.
WESP has the advantages of high dust removal efficiency, small pressure loss, simple operation, small energy consumption, no moving parts, no two times of dust, low maintenance cost, short production stop period, working at the dew point temperature below, combined with other flue gas treatment equipment and diversified design forms due to the compact structure.

The wet electrostatic precipitator uses the surface of liquid scour to clean the dust on the surface of dust. It can effectively collect fine particles (PM2.5 dust, SO3 acid fog, aerosol), heavy metals (Hg, As, Se, Pb, Cr), organic pollutants (polycyclic aromatic hydrocarbons, dioxin) and so on. The soot emission in wet flue gas can reach 10mg/m3 or even 5mg/m3 after wet electrostatic precipitator. The dust collection performance is not related to the dust characteristics. It is suitable for the treatment of wet flue gas, especially in the treatment of dust smoke after wet desulphurization in power plant and steel plant, but the investment cost of equipment is higher, and it needs to be matched with other dust removal equipment. Use.

Looking for ideal Wet Electrostatic Precipitator Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Desulphurization and Denitrification Deduster are quality guaranteed. We are China Origin Factory of Anodic Tube of FRP. If you have any question, please feel free to contact us.

Product Categories : Wet Dust Collector Series > Wet Electrostatic Precipitator

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Liuhuabing Mr. Liuhuabing
What can I do for you?
Contact Supplier