http://www.hrdustcollector.com
Home > Products > Industry Dust Collector > Stainless steel dust collector equipment

Stainless steel dust collector equipment

    Payment Type: L/C,T/T
    Incoterm: FOB,CIF
Basic Info

Model No.Customized

Additional Info

Packagingwooden crate

TransportationOcean,Land

PortXingang China

Payment TypeL/C,T/T

IncotermFOB,CIF

Product Description

Item
DMC24
DMC36
DMC48
DMC60
DMC72
DMC84
DMC96
DMC108
DMC120
Air volume passing(m3/h)
870-3240
1300-4880
1730-6500
2170-8130
2600-9750
3040-11400
3470-13000
3900-14630
4340-16270
Filtration rate(M/min)
0.8~3
0.8~3
0.8~3
0.8~3
0.8~3
0.8~3
0.8~3
0.8~3
0.8~3
Filtering area(m2)
18
27.1
36.1
45.2
54.2
63.3
72.3
81.3
90.4
Filter bag spec.(mm)
Ø120X2000
Ø120X2000
Ø120X2000
Ø120X2000
Ø120X2000
Ø120X2000
Ø120X2000
Ø120X2000
Ø120X2000
No. of filter bag
24
36
48
60
72
84
96
108
120
Equipment resistance(Pa)
980-1200
980-1200
980-1200
980-1200
980-1200
980-1200
980-1200
980-1200
980-1200
Collection efficiency(%)
99~99.9
99~99.9
99~99.9
99~99.9
99~99.9
99~99.9
99~99.9
99~99.9
99~99.9
Inlet dust concentration(g/m3)
<15
<15
<15
<15
<15
<15
<15
<15
<15
No. of pulse valve(S)
4
6
8
10
12
14
16
18
20
pulse cycle(S)
0.1~0.2
0.1~0.2
0.1~0.2
0.1~0.2
0.1~0.2
0.1~0.2
0.1~0.2
0.1~0.2
0.1~0.2
Injection pressure(MPa)
0.5~0.7
0.5~0.7
0.5~0.7
0.5~0.7
0.5~0.7
0.5~0.7
0.5~0.7
0.5~0.7
0.5~0.7
Compressed air consumption((m3/min)
0.084~0.168
0.162~0.252
0.168~0.336
0.21~0.42
0.252~0.504
0.294~0.588
0.336~0.672
0.378~0.756
0.42~0.84
The flue gas is entered into Venturi through the flue, and the inlet of the throat is sprayed evenly by the water. Because of the high speed movement of the flue gas, the water is melted into a fine ash in the fine water mist and wet flue gas. In this way, the ash and the water droplets are collided and condensed, especially the dust with small diameter can be dissolved in water mist. The first dust removal and desulphurization are achieved, which are fully prepared for the separation of the ash. After that, the flue gas will continue to impact the lime water in the tank. The dust in the flue gas and the SO2 in the flue gas react with the lime water in the pool to produce sulphate, and sink into the water under the action of inertia force, gravity, adhesion and cohesiveness. The second desulphurization process is completed at the bottom. The water fume aroused by the flue gas, the water mist and the flue gas after the washing are carried out at the same time, the gas and water are lifted simultaneously, the flue gas is fully reacted with the lime water, then the gas water is separated through the impeller dehydrator, and the water flows through the water pipe into the pool, and the flue gas is finished after third dust removal and desulphurization. After purification, the flue gas is purified. The gas is discharged into the atmosphere through the fan.

The boiler deduster can be divided into steam precipitator, bag filter, boiler desulphurizing dust collector, vertical kiln bag filter and so on.



Product Categories : Industry Dust Collector

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Liuhuabing Mr. Liuhuabing
What can I do for you?
Contact Supplier