Botou Hengrui Environmental Protection Equipment Co. Ltd.
Size of Soft Seal Gate Valve,Installation of Soft Seal Gate Valve,Effect of Soft Seal Gate Valve
Model No.: Customized
Packaging: wooden crate
Transportation: Ocean,Land
Port: Xingang China
Payment Type: L/C,T/T
Incoterm: FOB,CIF
The opening and closing parts of the Soft Seal Gate Valve, industrial valve and soft seal gate valve are gate plates. The direction of the motion of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully open and fully closed, and can not be adjusted and throttle. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form wedges and wedge angles that vary with the parameters of the valve, usually 50 and 2 52''''when the medium is not high.
Product principle
The sluice gate of a wedge valve can be made into a whole, called a steel gate, or a sluice which can produce a small amount of deformation to improve its craft and make up for the deviation produced by the angle of the seal in the process of processing. This gate is called an elastic gate.
The soft seal gate valves are divided into two types: the open gate soft seal gate valve and the hidden rod soft seal gate valve. Usually there are trapezoid threads on the lifting rod. Through the nut in the middle of the gate and the guide slot on the valve body, the rotation motion is turned into a straight motion, which is to turn the operating torque into an operating thrust. When the valve is opened, when the height of the gate is equal to the 1:1 times of the valve's path, the passage of the fluid is completely unimpeded, but the position is not monitored during operation. The actual use is based on the vertex of the stem as a sign, that is, the location of the open position as its full open position. In order to consider the lock up phenomenon of temperature change, the 1/2 1 circle is usually returned to the top position as the position of the full open valve. Therefore, the full opening position of the valve is determined according to the location of the gate. Valves of this type should be installed horizontally in pipes.
4, the hardness and strength of the valve bushing material should not be greater than that of the stem, and it will not form electrochemical corrosion with the valve stem and valve body under the condition of water immersion.
5, the material of the sealing surface
Product Categories : Industrial Valves > Soft Seal Gate Valve