http://www.hrdustcollector.com
Home > Products > Dust Collector Fittings > Dust Collector Bag Cage > Welding Dedusting Filter Bag Cage

Welding Dedusting Filter Bag Cage

    Payment Type: L/C
    Incoterm: FOB,CIF
Basic Info

Model No.Customized

Additional Info

Packagingcarton

TransportationOcean,Land

PortXingang China

Payment TypeL/C

IncotermFOB,CIF

Product Description

The exterior is cast with high strength, high temperature, acid and alkali resistant materials. The outer protective steel plate of the cylinder equipment has greatly enhanced the strength and service life of the equipment.

The upper sink of the dust removal skeleton is a ceramic structure. The ceramic dust collector ensures no water leakage in the water supply process, avoids the water seepage problem of the original granite deduster, and enhances the use effect of the dust collector.
The installation is simple, generally 1 meters per section, the site can be installed for half a day to complete the installation, reducing the construction cycle.
The structure of the body is 1 meters per section, with concave and convex joints at each joint, and furan resin or acid alkali adhesive mud at the seam to ensure that the connection is not water leakage, and the dust skeleton overcomes the common defects of the seeping and air leakage of the original granite dust collector.

Characteristics of dust removal skeleton

Spring dedusting skeleton

Service life
The dust skeleton is the rib of the filter bag. It should be light and easy to install and maintain. The quality of the frame directly affects the filtering state and service life of the filter bag. The natural granite is used to process the circular curved plate through mechanical processing. The whole structure is smooth and smooth. It has the characteristics of corrosion resistance, abrasion resistance and high temperature resistance. The exterior is poured with high strength and high temperature resistant and alkali resistant materials. The strength and life span of the equipment are greatly enhanced by the outer protective steel plate of the barrel equipment. The body uses 1 meters per section structure, the joints have concave and convex joints at each joint, and the joints are connected with furan resin or acid alkali glue mud at the joint to ensure that the connection is not leaky; overcoming the common faults of the seeping and air leakage of the original granite duster. The upper sink. For the ceramic structure, the ceramic dust collector ensures no water leakage in the water supply process, avoids the seepage setback of the original granite duster water trough, and strengthens the use effect of the dust collector. The simple installation is 1 meters per day, and the site can be installed for half a day, reducing the construction period.

Organosilicon air filter cage bone
influence factor
(1) the influence of the size of the dust skeleton: in the geometric size of the dust skeleton, the diameter of the dust skeleton, the inlet of the gas and the shape and size of the exhaust pipe are the most important factors.
(2) the influence of gas parameters on the performance of the dust removal framework, including the influence of gas flow, the influence of the concentration of the gas, the influence of the moisture content of the gas, the influence of the density, viscosity, pressure and temperature of the gas.
(3) the effect of the physical properties of dust on the dust skeleton
(4) the influence of the roughness of the inner wall of the dust skeleton: the dust particles concentrated near the wall will cause a swirling flow caused by the rough surface, so that some dust particles are thrown into the rising air and into the exhaust pipe, which reduces the efficiency of the dust removal.


Product Categories : Dust Collector Fittings > Dust Collector Bag Cage

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Liuhuabing Mr. Liuhuabing
What can I do for you?
Contact Supplier