Making standards The A. cage type dust removal framework requires that the support ring and the longitudinal reinforcement are evenly distributed, and should have enough strength and stiffness to withstand the pressure of the filter bag in the state of filtering and cleaning, and can prevent the damage and deformation caused by the collision and impact during the normal transportation and installation. All welding points of the B. filter bag skeleton shall be solidly welded. No soldering, no welding and missing welding are allowed. The surface of the C. filter bag and the filter bag should be smooth and smooth. No welding scar is allowed. Uneven and burr. The D. spring type skeleton should have enough circle and elasticity, and the spacing should be even after pulling.
The skeleton surface of the E. filter bag must be treated by anticorrosion, which is electroplated according to different needs. Spray or paint, such as high temperature, should be used to prevent corrosion and meet the requirements of the use temperature. The perpendicularity of the F. dusting bag cage is 6M positive and negative 1mm. G. dusting bag cage has a whole, a section, or three sections. H. dust bag cage length of 3 meters or more with steel forming a single style tube.
J. dust bag cage has zinc plating, plastic spraying, silicone treatment.
Product Categories : Dust Collector Fittings > Dust Collector Bag Cage