DMF-2L-B electromagnetic pulse valve

The Electromagnetic Pulse Valve is the actuator and key component of the pulsating bag dust remover. It is mainly divided into three kinds, the right angle electromagnetic pulse valve, the submerged electromagnetic pulse valve and the direct pass electromagnetic pulse valve. Each class has 6 specifications from 20 to 76mm (0.75 ~ 3in). Each electromagnetic pulse valve has a gas consumption of 30 to 600m3/min (0.2 to 0.6MPa) at one time. It is worth noting that the working pressure right angle valve and through valve of domestic pulse valve are 0.4 ~ 0.6MPa, and the submerged valve is 0.2 ~ 0.6MPa. No matter which type of valve, the working pressure range of the imported products is 0.06 ~ 0.86MPa, and the two types of valves do not bear the difference between the pressure and the high and low pressure of the applied pressure.

Working conditions:
When the electromagnetic pulse valve is used, the environmental conditions are very important, which is related to the normal and smooth operation of the electromagnetic pulse valve. The environment conditions of the electromagnetic pulse valve:
1, according to the type of power supply, AC and DC solenoid valves are selected respectively. Generally speaking, AC power supply is convenient to use.
2, in corrosive or explosive environments, corrosion resistance should be preferred according to safety requirements.
3, if the environment space is restricted, please use the multi-function solenoid valve, because it eliminates bypass and three manual valves and is convenient for online maintenance.

4, the power supply voltage fluctuations usually AC +%10%.-15%, DC tolerance of about%10, if ultra poor, must take measures to stabilize or put special order requirements.
5, the highest and minimum temperature of the environment should be selected within the allowable range. If there is excess deviation, special orders should be put forward.
6, the power condition of the electromagnetic pulse valve
7, special occasions such as vibration, bump and impact should be selected in the environment, such as marine solenoid valves.
8, voltage specifications are preferred to AC220V.DC24V.
9, in the environment where relative humidity is high and water droplets are dripping, we should choose waterproof solenoid valves.
10, the rated current and power consumption should be selected according to the power supply capacity. Attention should be paid to the higher VA value when AC starting, and the indirect guided solenoid valve should be preferred when the capacity is insufficient.

Product Categories : Dust Collector Fittings > Electromagnetic Pulse Valve